- Adhesive-coated contamination control mat captures particulates from foot-traffic and
   equipment wheels before they can get tracked into the cleanroom.
 - Antimicrobial - Long-lasting protection against growth of organisms, including mold, mildew,
   fungi and algae.
 - The Antimicrobial is nonleeching and nontoxic.
 - Available in white, blue and gray.
 - Available sizes: 18 x 36, 18 x 46, 24 x 36, 25 x 45, 36 x 46 & 36 x 60.

 - Available in 40 colors.
 - Homogeneous construction delivers the ultimate in durability, resilience and resistance to
   static, and rolling loads.
 - A protective urethane finish offers increased scuff resistance with improved maintainability.
 - Solid and patterned weld rods are available to ensure asepsis in required spaces.
 - Certified for low VOC (volatile organic compound) emissions.
 - 4” flash coving for ease of use.

 CleanZone is a high performance contamination control mat or floor covering designed to attract, collect and retain viable and non-viable contamination. Installed with easy-in, easy-out self adhesive panels. Suitable for light wheeled traffic and heavier pedestrian flows. Available in a range of mats or floor coverings to suit your facilities needs. Prevents over 99% of contamination from entering your critical area.

 - Improved quality of working life due to reduced allergens in the atmosphere.
 - Reduced floor and air particle / microbial counts.
 - Improved yield, cost savings and profitability.
 - Reduced risk of high product rejection rates.
 - CleanZone products cannot be bypassed and require no overt action.

 Chemically resistant epoxy used to coat concrete, masonry or steel surfaces including floors, walls, equipment, trenches and structural members.

 - Exceptional chemical resistance.
 - 100% solids performance, with paint-like color, hide and spreadability.
 - Full range of colors.
 - Can be applied to cool (350F) and damp surfaces, even under water. (longer cure time).
 - Self-extinguishing in thin films.
 - 100% non-volatile.

 - 3” Radius coving.
 - Eliminating 90-degree corners with CleanCove helps assure that your cGMP facility will be
   validatable.
 - With minimal effort, the three part CleanCove system provides a smoothly rounded, easy to
   clean curved transition from ceiling-to-wall and at wall-to-wall inside corners.
 - Extruded aluminum coves snap into vinyl anchor strips, and welded 3-way inside corner
   assemblies make perfectly finished junctures at the complex inside ceiling corner and wall
   intersections.