Gator Jaw

90° Inside L-Angle Bracket

  • Zinc plated steel.
  • 4 Mounting holes.
  • Requires 4 GJF-500 fasteners. 2.5’’ x 2.5’’ x 1’’ OD.
  • Flange area: 1’’ x 2.5’’.
  • 11 Gauge thick.
  • Weight each: 2.5 oz.

90° Inside Gusset Bracket

  • Zinc plated steel.
  • 4 Mounting holes. Requires 4 GJF-500 fasteners. 4’’ x 4’’ x 1’’ OD.
  • Flange areas: 1’’ x 4’’.
  • 12 Gauge thick.
  • Weight each: 5.7 oz.

Universal Shelf Support Bracket

  • Zinc plated steel.
  • 1 Mounting hole. Requires 1 GJF-500 fastener. 1.875’’ x .875’’ x 1’’OD.
  • 1.125’’ x .75’’ x .81’’ ID.
  • 14 Gauge thick.
  • Weight each: 1 oz.

Corner Insert Key For Cabinet Door Framing

  • Mill finish aluminum.
  • Press fit.Approx. .875’’ x 3’’ x 3’’.
  • Weight each: 4.3 oz.

GJC-415R Rectangular-Plate Swivel Caster

  • Grey rubber wheel.
  • Plain bore, bearing swivel and wheel lock. 4’’ x 1 1/2’’ Wheel.
  • 5 1/4’’ Mount height.
  • 3 1/2’’ x 2 12’’ Plate.
  • Load rating 250 lbs. each.

Trim Cap For Frame

  • Snaps into channels of GJX-175 or GJX-875 frame.
  • ABS Plastic.
  • Colors Available: Black and Silver / Gray.
  • 1.125”wide x 12’ lengths.

Main Framing Member

  • 6063 T5 Aluminum.
  • Clear anodized finish.
  • Available in 16’, 12’ & 8’ lengths.
  • 1.75’’ x 1.75’’ square.
  • Weight per foot: 1.35 lbs.

Universal Framing (doors, hanging bins etc.)

  • 6063 T5 Aluminum.
  • Clear anodized finish.
  • Available in 12’ lengths.
  • 1.75’’ x .875’’
  • Weight per foot: .68 lbs.

Cabinet Door Framing

  • 6063 T5 Aluminum, Clear anodized finish.
  • Available in 16’ & 8’ lengths.
  • Requires: GJB-90-CK corner keys.
  • Tail accepts any 1/4’’ thick insert.
  • For 1/8’’ inserts use glazing GJM-100-GZ. 1.75’’ x .25’’
  • .75’’ deep tails for inserts.
  • Weight per foot: .35 lbs.

90° Outside Corner Gusset

  • 4.375’’ x 4.375’’ OD.
  • Zinc plated steel.
  • 4 Mounting holes.
  • Requires 4 GJF-500 fasteners.
  • Flange areas: 1’’ x 3’’.
  • Metal: .105 thick.
  • Weight each: 5.2 oz.

90° Double Outside Corner Gusset

  • Zinc plated steel. 6 Mounting holes.
  • Requires 6 GJF-500 fasteners. 7.750’’ x 4.375’’ OD
  • Flange areas: 1’’ x 3’’
  • Metal: .105 Thick.
  • Weight each: 9 oz.

Glazing Seal For 1/4” Insert Panels

  • Snaps into channel behind panel.
  • color:grey.
  • 3/4” wide x 3/8” thick.
  • 12’ lengths.
  • For use with GJX-175 framing.