1
- Chrome-plated metal parts, vinyl seat underwrap with filtered exhaust ports, Task Control ergonomic mechanism and vinyl upholstery recommended for clean room use.
- Class 1000 is equivalent to ISO Class 6.
- 5- Legged reinforced nylon base.
- Concave seat with backrest and lumbar support.
- Cusomizable within guidelines pertaining to Class 1000 cleanroom specifications.
 
2
- Choose AET chairs for top performance in a variety of environments including; industry,   education, laboratory, cleanroom, static control, health care and office.
- Breathable Class 10 Clean Room Chairs.
- Chrome-plated metal parts, non-outgassing, spun-woven nylon upholstery with high-   efficiency filter media, Task Control ergonomic mechanism and clean room casters or glides.
- Parts are cleaned and single-bagged in BioFitís clean room in certified clean bags.
- Breathable Class 10 is equivalent to ISO Class 4
 
3
- Chrome-plated metal parts, Class 100 filtration system, Task Control ergonomic mechanism,   conductive glides or casters, drag chain, continuity contact points, and Microcon vinyl   upholstery.
- Class 100 is equivalent to ISO Class 5.
- Different bases available to meet varied environmental and budget demands.
- Select from a variety of options such as adjustment controls, backrests, casters and glides.
- Modular construction allows component upgrades, interchanges and replacement.
- Guaranteed performance.
- Tough finishes to resist crackling and peeling.
 
4
- Chrome-plated metal parts, Class 10 air reservoir, Task Control ergonomic mechanism,   conductive casters or glides, drag chain, continuity contact points, and Microcon vinyl   upholstery.
- The parts are cleaned and single-bagged in BioFit’s clean room in certified clean bags.
- Class 10 is equivalent to ISO Class 4.
- Select from a variety of options such as adjustment controls, backrests, casters and glides.
 
5
- Chrome-plated metal parts, C1 air reservoir, Articulating Seat Control and air reservoir bag   that are both encased in a protective pan, drag chain, Microcon vinyl upholstery, continuity   contact points, and conductive casters or glides.
- The parts are cleaned and double-bagged in BioFit’s clean room, in certified clean bags, for   customer assembly in the customer’s clean room.
- Class 1Max is equivalent to ISO Class 3.
 
Basic Specifications:
Backrest: 14 1/2” wide x 9 1/2” high, lumbar support, plastic protective panel.
Seat: concave, 18 1/2” wide x 16 1/2” deep x 3” thick with internal seatboard bumperguard.
Controls: standard with Task Control -- Soft Touch pneumatic seat-height adjustment, fixed rearward seat tilt of 3_°, backrest tilt, backrest-height adjustment.
Metal parts: on ETT and BTT Series chairs have a powder-coated finish as standard or a chrome-plated finish when specified with a C option code.
Base: 5-legged black reinforced composite base with 27” leg spread (26” caster to caster); not for ESD use.
Casters and Glides: Models available standard with casters have an R following the model number/manufacturing code. The remaining models are standard with nickel-plated glides. Standard casters are a single-wheel ball bearing caster for hard floors; many other optional casters/glides are available.
Fire Retardant: meets California Technical Bulletin 117; treatment to meet CAL 133 is optionally available.
Upholstery: A wide range of upholstery vinyls and fabrics are available to meet your needs.