Search our site:   
90° Inside L-Angle bracket
- Zinc plated steel.

- 4 Mounting holes.

- Requires 4 GJF-500 fasteners. 2.5’’ x 2.5’’ x 1’’ OD.

- Flange area: 1’’ x 2.5’’.

- 11 Gauge thick.

- Weight each: 2.5 oz.
 
90° Inside gusset bracket
- Zinc plated steel.

- 4 Mounting holes. Requires 4 GJF-500 fasteners. 4’’ x 4’’ x 1’’ OD.

- Flange areas: 1’’ x 4’’.

- 12 Gauge thick.

- Weight each: 5.7 oz.
 
Universal shelf support bracket
- Zinc plated steel.

- 1 Mounting hole. Requires 1 GJF-500 fastener. 1.875’’ x .875’’ x 1’’OD.

- 1.125’’ x .75’’ x .81’’ ID.

- 14 Gauge thick.

- Weight each: 1 oz.
 
Corner insert key for cabinet door framing
- Mill finish aluminum.

- Press fit.Approx. .875’’ x 3’’ x 3’’.

- Weight each: 4.3 oz.
 
GJC-415R Rectangular-Plate swivel caster
- Grey rubber wheel.

- Plain bore, bearing swivel and wheel lock. 4’’ x 1 1/2’’ Wheel.

- 5 1/4’’ Mount height.

- 3 1/2’’ x 2 12’’ Plate.

- Load rating 250 lbs. each.
 
Trim Cap for frame
- Snaps into channels of GJX-175 or GJX-875 frame.

- ABS Plastic.

- Colors Available: Black and Silver / Gray.

- 1.125”wide x 12’ lengths.
 
Main framing member
- 6063 T5 Aluminum.

- Clear anodized finish.

- Available in 16’, 12’ & 8’ lengths.

- 1.75’’ x 1.75’’ square.

- Weight per foot: 1.35 lbs.
 
Universal framing (doors, hanging bins etc.)
- 6063 T5 Aluminum.

- Clear anodized finish.

- Available in 12’ lengths.

- 1.75’’ x .875’’

- Weight per foot: .68 lbs.
 
Cabinet door framing
- 6063 T5 Aluminum, Clear anodized finish.

- Available in 16’ & 8’ lengths.

- Requires: GJB-90-CK corner keys.

- Tail accepts any 1/4’’ thick insert.

- For 1/8’’ inserts use glazing GJM-100-GZ. 1.75’’ x .25’’

- .75’’ deep tails for inserts.

- Weight per foot: .35 lbs.
 
90° Outside corner gusset
- 4.375’’ x 4.375’’ OD.

- Zinc plated steel.

- 4 Mounting holes.

- Requires 4 GJF-500 fasteners.

- Flange areas: 1’’ x 3’’.

- Metal: .105 thick.

- Weight each: 5.2 oz.
 
90° Double outside corner gusset
- Zinc plated steel. 6 Mounting holes.

- Requires 6 GJF-500 fasteners. 7.750’’ x 4.375’’ OD

- Flange areas: 1’’ x 3’’

- Metal: .105 Thick.

- Weight each: 9 oz.
 
Glazing Seal for 1/4” insert panels
- Snaps into channel behind panel.

- color:grey.

- 3/4” wide x 3/8” thick.

- 12’ lengths.

- For use with GJX-175 framing.
 
   Ultrapure Technology, Inc.  |  325 Brogdon Road  |  Suwanee, Georgia 30024  |  1-800-932-0309  |  770-932-0309  |  Fax # 770-932-0809
  sitemap | contact 
© Ultrapure Technology, Inc. 1997 - 2008  |  website designed and maintained by   JSE Designs, LLC.