FW01
Excessive powder has been removed by a mechanical tumbling process. for use in situations where particles are not so critical, but product protection from skin oils, salt and perspiration is essential. 10 gross to a polybag, 20 polybags per case (200 gross/case).

 - Mechanically Cleaned, Low Powder Finger Cots.
 - Color: White.

Small 10 gross / Bag  
Medium 10 gross / Bag  
Medium/Large 10 gross / Bag  
X-Large 10 gross / Bag  
FW04
Average surface resistivity is 10/sq.and average decay charge rate is < 2 seconds. For use with CLASS 2/CATEGORY B static sensitive device with a threshold sensitivity above 1000V, packaged in an electro-static shield bag for more protection from static charges. 5 gross to a polybag. 40 polybags per case(200 gross/case).

 - Antistatic Powder Free, Class 100 Finger Cots.
 - Color: Pink.

Small 5 gross / Bag  
Medium 5 gross / Bag  
Medium/Large 5 gross / Bag  
X-Large 5 gross / Bag  
FY01
Processed by advanced chlorination washing to minimize contamination both inside and outside. Inspected and packaged under class 100 specifications. 10 gross to a polybag, 20 polybags per case(200 gross/case).

 - Powder free, Class 100 finger Cots.
 - Color: Ember.

Small 10 gross / Bag  
Medium 10 gross / Bag  
Medium/Large 10 gross / Bag  
X-Large 10 gross / Bag  
FB01
Excellent tactics sensitivity for static free handling of ESD parts and components, 2x 10/sq. Average surface resistivity allows rapid bleed off of any charge. For use with CLASS Ì/CATEGORY A( < 1000V) static sensitive electronic devices. Packed in an electro-static bag for more protection from static charge. 5 gross to a polybag, 40 polybags per case (200 gross/case).

 - Static Dissipative Finger Cots.
 - Color: Black.

Small 5 gross / Bag  
Medium 5 gross / Bag  
Medium/Large 5 gross / Bag  
X-Large 5 gross / Bag  
7C Anti-Static Latex Fingercots ISO 5 (Class 100)
RoHS Compliant, recommended for use with Class II static sensitive devices (thresholds above 1000V). Washed, powder-free 3 mil latex; ISO 5 (Class100) cleanroom processed and packaged in ESD-safe inner bags. Each pack is double-bagged in nitrogen-flushed TrayPaks and immobilized to prevent charge generation.

Applications: ESD-sensitive areas, Defense, avionics, marine electronics, consumer electronics, IC manufacturing, wire bonding, repair stations, assembly areas.

This product contains natural rubber latex which may cause allergic reactions.

Small 5 Gross (720 each)/TrayPak  
Medium 5 Gross (720 each)/TrayPak  
Large 5 Gross (720 each)/TrayPak  
X-Large 5 Gross (720 each)/TrayPak  
5C Powder-Free Latex Fingercots ISO 5 (Class 100)
ISO 5 (Class 100) Fingercots. For cost effective protection from skin salts, oils and particulates. Proven latex formulation completely eliminates contamination risks to your products from silicone oils and plasticizers. Lowest ionics/extractables; particulates measured by IES-RP-CC005. Washed, powder-free, textured, tissue weight, rolled, nominal 2 3/4" length, 3 mil latex. ISO 5 (Class 100) cleanroom processed and double bagged in stackable TrayPaks for easy storage and dispensing; nitrogen-flushed for maximum freshness at point of use.

Applications: Discrete components, hard drive assemblies, die bonding, wire attach, disk drives, thin film heads, optics, finishing, cleaning and handling of precision instruments.

This product contains natural rubber latex which may cause allergic reactions.

Small 5 Gross (720 each)/TrayPak  
Medium 5 Gross (720 each)/TrayPak  
Large 5 Gross (720 each)/TrayPak  
X-Large 5 Gross (720 each)/TrayPak