2″ Gasket Seal Grids Heavy-Duty, Rod-Suspended Ceilings.
For Semiconductor, Microelectronic, Medical Device, Aerospace, Pharmaceutical, Biotechnology, and Data Center Applications.
- All extrusions have a continuous 1/4-20 thread boss for connection and suspension at any location
- Intersection connectors join the extruded aluminum grid members and provide an attachment point for suspension
- Extruded aluminum grid members have a 2″ wide flange
2″ Gel Seal Grids Heavy-Duty, Rod-Suspended Ceilings.
For Semiconductor, Microelectronic, Medical Device, Aerospace, Pharmaceutical, Biotechnology, and Data Center Applications.
- All extrusions have a continuous 1/4-20 thread boss for connection and suspension at any location
- Intersection connectors join the extruded aluminum grid members and provide an attachment point for suspension
- Extruded aluminum grid members have a 2″ wide flange
2″ Grid Systems
- Medium-duty aluminum support struts measuring 2” x 4” are integrated between ceiling panels for room widths of up to sixteen feet wide with limited ceiling loads.
- Stiffeners can be added to aluminum struts measuring 2” x 4” to accommodate larger rooms up to eighteen feet wide with larger ceiling loads.
- Heavy-duty truss systems can be added to standard struts to accommodate spans up to twenty-one feet wide and heavier ceiling loads.
SBB 2″ Light Duty
The 2″ Light Duty Ceiling Systems is the perfect solutions for diverse applications including semiconductor, microelectronics, aerospace, food service, food processing, pharmaceutical, and hospital industries. The gasketed grid is designed with a 2″ face tee to support HEPA filter systems and light fixtures. Installation is simplified with factory installed interconnecting hardware to the extent possible.
SBB 2″ Heavy Duty
Our 2″ Heavy Duty Grid system is designed as a flush ceiling system which provides end users and owners with the ability to utilize the area above the cleanroom for mechanical services or walk-on capabilities for maintenance access when applicable Interconnecting hardware is factory installed to the extent possible.
The use of walkable ceilings for access can minimize the need for catwalks above the cleanroom areas, reducing steel costs and installation time. The use of catwalks can then be limited to areas where equipment access is needed for maintenance or replacement of larger pieces of equipment such as AHU motors and heat exchangers.
SBB 2045 Grid System
- Full Service deck comes with Grid
- Flip Up light Fixtures for Lamp Replacement
- Long Span for unencumbered access
- Sprinkler Heads in Grid
- Independent laboratory tested & certified structural performance
